Table of Contents
Advertisement
30
MAGIC REMOTE CONTROL
Displayed when you press
1
the
Wheel (OK) button
on the magic remote control.
Check program information.
To Register the Magic Remote Control
To use the Magic Remote control, register it with your projector first.
1
Put batteries into the Magic Remote and turn the Projector on.
2
Point the Magic Remote at your projector and press the
(OK) on the remote control.
•
If the projector fails to register the Magic Remote, try again after turning
the projector off and back on.
To Re-register the Magic Remote Control
1
Press the
five seconds, to unpair the Magic Remote with your projector.
2
Press the
the magic remote control.
•
Pressing and holding the
and re-register Magic Remote at once.
1
(Home) and
Wheel (OK) button towards the projector to re-register
(EXIT to LIVE) button will let you cancel
2
If you point and hold the
2
pointer at the bottom left of
the screen while watching
projector, the MY APPS
icon is displayed. Clicking
the icon displays the MY
APPS menu.
(BACK) buttons at the same time, for
Wheel
Advertisement
Table of Contents
