Table of Contents
Advertisement
10
SAFETY PRECAUTIONS
Others
WARNING
•
When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
- Using a damaged power cord
may result in short circuit
or fire.
•
Do not use the projector near
highprecision electronic devices
or those that transmit weak
radio signals.
- This may affect the operation
of the product, causing an
accident.
•
Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service center.
- This may result in fire or
electric shock.
•
Do not stare directly into lens
when in operation, eye damage
can occur.
•
No user serviceable parts
inside unit. High voltage parts
can cause shock and even
electrocution.
•
Proper ventilation required, do
not block airflow around unit.
Doing so can cause injury and
internal overheating.
•
To prevent damage to lamp,
unit must remain plugged in for
approximately 3 minutes after
power down to allow for proper
cool down (not applicable on
LED models).
•
Do not touch the lens; doing so
can result in burns or damage
to lens. Lens and unit may be
HOT during and immediately
after use. Use caution when
handling unit, allowing for proper
cool down.
•
Only use a grounded electrical
outlet.
•
Do not insert anything into or
cover up the exhaust vents.
- This may result in fire or
electric shock.
•
Follow all maintenance
guidelines for optimal use;
service only at an authorized
service center.
•
Lamp contains mercury and
as such must be disposed of
according to local, state and
federal laws (not applicable on
LED models).
Advertisement
Table of Contents
