Table of Contents
Advertisement
Problem
For an analogue
broadcast, stereo is not
clear or sound comes
from one speaker only.
TV sound is not in
sync with the image or
the sound breaks up
occasionally.
The volume changes
when I change program.
On certain programs,
there is no sound at all,
or only the background
music can be heard
(in case of a programs
created for overseas
viewers).
There is no sound when
connected to HDMI /
USB.
•
In a poor reception area (areas with
weak or unstable signals) or if multi
audio is not stable, select Mono on
Multi Audio.
•
Adjust the balance using the navigation
button.
•
If the issue affects a specific TV program
only, it may be caused by problems with
the broadcast signal for the individual
station. Check with the TV station or
your cable operator.
•
Volume can vary from program to
program.
•
Set Auto Volume to On.
•
In Language, set Language → Audio
Language to the language of your
choice. Even if you change the language
on Multi Audio, you can go back to
the default setup once you turn off the
power or change the program.
•
Verify that the HDMI
speed.
•
Check if the USB device and cable is
version 2.0 or higher.
•
Use only regular music (*mp3) files.
INFORMATION
Solution
cable is high
®
131
Advertisement
Table of Contents
