Table of Contents
Advertisement
44
USING THE PROJECTOR
To Use SIMPLINK
SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently using the projector remote control only via
the SIMPLINK menu.
1
Connect the projector's HDMI terminal with the SIMPLINK device's
HDMI output terminal using an HDMI cable. For home theater units
with a SIMPLINK function, connect HDMI terminals as above, and
use an optical cable to connect Optical Digital Audio Out from the
projector to Optical Digital Audio In of the SIMPLINK device
2
Select
(Home) → MY APPS → SIMPLINK. SIMPLINK menu
window appears.
3
Select SIMPLINK Setting on SIMPLINK menu window. SIMPLINK
setup window appears.
4
SIMPLINK to On in SIMPLINK setup window.
5
Close SIMPLINK setup window.
6
Select the device to control from
SIMPLINK.
NOTE
•
This function only works on devices with the SIMPLINK logo
(
). Verify that the external device has a SIMPLINK logo.
•
To use the SIMPLINK function, you need to use a high-speed HDMI
cable (with CEC, or Consumer Electronics Control, feature added).
High-speed HDMI
exchange between devices.
•
Turn on or select the media of a device with home theater features to
see the speaker switch to External Speaker.
•
To use the Listen via External Speaker function, connect an optical
cable (Purchase separately) or HDMI-ARC-enabled device via the
HDMI-ARC port.
•
Switching to external input causes devices operating with SIMPLINK
to stop.
•
Use of a third-party device with HDMI-CEC features may cause
malfunctions.
•
Connect with an Optical cable (sold separately) to use External
Speaker.
cables have pin 13 connected for information
®
(Home) → MY APPS →
®
Advertisement
Table of Contents
