Installing The Coin-Cell Battery; Removing The System Board - Dell Latitude E5450 Owner's Manual

3. Perform the following steps to remove the coin-cell battery from the computer:
a. Peel the adhesive tape to access the coin-cell cable [1].
b. Disconnect the coin-cell cable from its connector on the system board [2].
c. Pry the coin-cell battery to remove it from the system board [3].

Installing the Coin-cell Battery

1. Insert the coin-cell battery into its place on the system board.
2. Connect the coin-cell battery cable to its connector on the system board.
3. Stick the adhesive tape to secure the coin-cell battery cable.
4. Install the:
a. palmrest
b. keyboard
c. keyboard trim
d. hard-drive assembly
e. memory
f. base cover
5. Follow the procedures in

Removing the System Board

1. Follow the procedures in
2. Remove:
a. SD card
b. base cover
c. battery
d. memory
e. hard-drive assembly
f. keyboard trim
g. keyboard
h. palmrest
i. display-hinge brackets
36
After Working Inside Your
Before Working Inside Your
Computer.
Computer.