Installing The Camera; Removing The Edp Cable - Dell Latitude E5450 Owner's Manual

Installing the Camera

1. Insert the camera to its place on the display assembly.
2. Connect the camera cable to its connector.
3. Install the:
a. display panel
b. display bezel
c. battery
d. base cover
4. Follow the procedures in

Removing the eDP Cable

1. Follow the procedures in
2. Remove the:
a. base cover
b. battery
c. memory
d. hard-drive assembly
e. keyboard trim
f. keyboard
g. palmrest
h. display-hinge brackets
i. display assembly
j. display bezel
k. display panel
3. Perform the following steps to remove the eDP cable from the computer:
a. Disconnect the eDP cable from its connector [1].
b. Peel the eDP cable [2] and remove the eDP cable from the computer [3].
34
After Working Inside Your
Before Working Inside Your
Computer.
Computer.