After Working Inside Your Computer - Dell Latitude E5450 Owner's Manual

Or
* On the Home screen, touch the
– Using a mouse:
a. Point to upper-right corner of the screen and click Settings.
b. Click the
Or
* On the Home screen, click
• In Windows 7:
1. Click Start
2. Click Shut Down.
or
1. Click Start
2. Click the arrow in the lower-right corner of the Start menu as shown below, and then click
Shut Down
2. Ensure that the computer and all attached devices are turned off. If your computer and attached
devices did not automatically turn off when you shut down your operating system, press and hold
the power button for about 6 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and
cables before turning on your computer.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular
Dell computer. Do not use batteries designed for other Dell computers.
1. Connect any external devices, such as a port replicator or media base, and replace any cards, such as
an ExpressCard.
2. Connect any telephone or network cables to your computer.
CAUTION: To connect a network cable, first plug the cable into the network device and then
plug it into the computer.
3. Replace the battery.
4. Replace the base cover.
5. Connect your computer and all attached devices to their electrical outlets.
6. Turn on your computer.
and select Shut down.
and then select Shut down.
.
.
and then select Shut down.
.
5