Advertisement
Robo-Kleen PLUS Manual:Layout 1
Installation
The power supply should be positioned so that ROBO-KLEEN PLUS
can reach all the walls of the swimming pool and must be at a
minimum distance of 10 feet from the edge of the pool.
CAUTION: INSURE THE 110V MAIN LINE OUTLET IS PROTECTED
BY A GROUND FAULT CIRCUIT INTERRUPTER (GFCI) OR EARTH
LEAKAGE CIRCUIT INTERRUPTER (ELCI). OTHERWISE, DEATH OR
INJURY CAN RESULT.
To connect ROBO-KLEEN PLUS to the
transformer, remove the cap on the
transformer output socket. Plug the
ROBO-KLEEN PLUS cord into the socket.
Notice the plug and socket are indexed
using pins.
Tighten the threaded plug cover so that
the cord cannot be accidentally pulled out.
*PLEASE NOTE: The transformer may display the name "Pool Hog". This is a universal transformer
that is used for many Robotic Pool Cleaners including the Robo-Kleen and the Robo-Kleen Plus.
4
3/4/08
3:59 PM
Page 4
Advertisement
