Advertisement
Quick Links
Robo-Kleen PLUS Manual:Layout 1
Table of Contents
Important Safeguards
Introduction
Installation
Operation
Cleaning Pattern Adjustment
Automatic Shutoff and Removal
Maintenance
Warranty
*PLEASE NOTE: The transformer may display the name "Pool Hog". This is a universal transformer
that is used for many Robotic Pool Cleaners including the Robo-Kleen and the Robo-Kleen Plus.
3/4/08
3:59 PM
Page 1
PLUS
www.smartpool.com
2
3
4
5
5
6
7
8
Advertisement
Related Manuals for SmartPool Robo Kleen Plus
Summary of Contents for SmartPool Robo Kleen Plus
- Page 1 Cleaning Pattern Adjustment Automatic Shutoff and Removal Maintenance Warranty www.smartpool.com *PLEASE NOTE: The transformer may display the name “Pool Hog”. This is a universal transformer that is used for many Robotic Pool Cleaners including the Robo-Kleen and the Robo-Kleen Plus.
- Page 2 Disconnect transformer from outlet when not in use. If cleaner is not working as it should or has been dropped or damaged in any way, contact SmartPool customer service before using. *PLEASE NOTE: The transformer may display the name “Pool Hog”. This is a universal transformer...
- Page 3 Robo-Kleen PLUS Manual:Layout 1 3/4/08 3:59 PM Page 3 Congratulations on your purchase! You will find ROBO- KLEEN PLUS to be the most effective pool cleaner available. Unlike water-powered cleaners, which put all dirt and debris through your existing pool pump and filter, ROBO-KLEEN PLUS has its own pump and filter system.
- Page 4 Robo-Kleen PLUS Manual:Layout 1 3/4/08 3:59 PM Page 4 Installation The power supply should be positioned so that ROBO-KLEEN PLUS can reach all the walls of the swimming pool and must be at a minimum distance of 10 feet from the edge of the pool. CAUTION: INSURE THE 110V MAIN LINE OUTLET IS PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPTER (GFCI) OR EARTH LEAKAGE CIRCUIT INTERRUPTER (ELCI).
- Page 5 Robo-Kleen PLUS Manual:Layout 1 3/4/08 3:59 PM Page 5 Operation DO NOT ENTER THE SWIMMING POOL WHILE ROBO-KLEEN PLUS IS IN OPERATION TO AVOID ENTANGLEMENT WITH CORD a. Connect the cable to the power supply b. Grasp the cleaner by a side handle and place ROBO-KLEEN PLUS in the pool.
- Page 6 Robo-Kleen PLUS Manual:Layout 1 3/4/08 3:59 PM Page 6 Automatic Shutdown and Removal ROBO-KLEEN PLUS will automatically shut down after a work cycle of approximately 3 hours. Should a second cleaning cycle be required, switch off the power supply for at least 30 seconds before restarting.
- Page 7 Robo-Kleen PLUS Manual:Layout 1 3/4/08 3:59 PM Page 7 Maintenance There are only a few simple steps to maintaining your ROBO-KLEEN PLUS. 1) Filter Bag a. Place ROBO-KLEEN PLUS upside down. Push the locking tabs to the side to unlock the bottom lid. Remove the bottom lid.
- Page 8 Pattern ink can also rub off when it comes into contact with objects in the pool. SmartPool, Inc. is not responsible for, nor does this limited warranty cover, pattern removal, abrasion, markings on or damage of any kind to vinyl liners.