Table of Contents
Advertisement
Problem: The display reads "CARD READ ONLY."
Solutions: This indicates that write protection is active on the card you have
inserted. Write protection prevents a user from deleting or changing recordings.
• To use the card for new recordings, remove the round sticker from the
recessed area on the card. This cancels write protection.
• This condition occurs when the memory card has been improperly formatted.
Return to Section 3.15.2 and follow the directions on how to format/erase the
card.
Problem: The display reads "WRONG TYPE OF CARD."
Solution: This indicates that the memory card you have inserted isn't compatible
with your Recorder. It may be compatible with some other digital product. Try
another card.
Problem: The unit indicates corrupted memory on startup.
Solution: If your unit indicates that memory is corrupted when you install new
batteries (display reads "INT MEMORY ERROR F", it is possible that an unusual
circumstance has occurred. This may happen when the batteries were being
installed, or perhaps if the batteries were removed while within a procedure. In this
case, pressing Delete will restart the unit; pressing Play will allow you to continue
using your unit. If this fails to correct the problem, press Play to Start. Copy all your
files onto your PC, then press and hold Delete to completely erase internal
memory. Restore files from your PC.
Problem: The unit loses a folder.
Solution: A folder can be lost if batteries are inserted or removed during certain
operations. In this case, the folder will be skipped with a double beep occurring
during folder scrolling (if beeps are on) when the missing folder is passed. To
correct this problem, use the Voice It Link software to delete the folder, referring
to the instructions in the help system.
CHAPTER 6: Troubleshooting
39
Advertisement
Table of Contents
