Table of Contents
Advertisement
MOBILE DIGITAL DICTATION RECORDER
2.1 Loading the Batteries and Starting the Recorder the First Time
• Remove the battery door on the back of the recorder. (See Section 5.2.)
• Install two AAA batteries. Note the orientation of the batteries shown on the
inside of the battery compartment.
• Replace the battery door.
• The unit will flash "START" and a downward-pointing arrow will direct you to
the Power button. Press and release the Power button to continue startup.
• The unit will go to the Clock Set screen.
2.2 Setting the Clock the First Time
The first item to be set will be blinking.
• Press the Rewind and Fast Forward buttons to set the clock to the correct time.
• Press Play to move from one setting to another.
• Continue in this manner until the clock shows the correct time and date.
• Press Delete or Power to exit the clock-setting mode.
Be sure to set the clock before using the Recorder. The clock is used to
put a time and date stamp on recordings, which will help you identify
them if you download them to a PC. Also, you may want to set a user ID
for yourself, which will attach your name to your recordings. This is
done via the Voice It Link software (see Chapter 4).
10
2. Getting Started
Figure 2-1. Setting the clock screen.
NOTE
Advertisement
Table of Contents
