• Press and release Play to bring up the microphone function. The display will
show the current microphone mode—either Dictation or Conference.
• Press Rewind or Fast Forward to switch from one microphone mode to
another.
• Press Delete or Power to exit and save changes or press Play to continue to the
next setup item.
3.6 Setting the Recorder for Voice-to-Text
• Set the recorder to VT speed.
• Set the microphone sensitivity to Dictation mode.
• Hold the microphone about two inches away from the speaker's mouth.
For voice-to-text translation, always hold the microphone about two
inches from and slightly off to the side of the speaker's mouth. The
microphone is located at the top-left of the front side of the recorder.
3.7 Turning Beeps On and Off
Your Recorder is programmed to beep in conjunction with certain functions.
Generally, low beeps indicate functions that cannot be attempted. Higher beeps
confirm actions. These beeps can be turned on or off.
• Press and release Menu until you see "SETUP PRESS."
Figure 3-2. Mic mode dictation screen.
CHAPTER 3: Settings and Basic Functions
NOTE
25