Table of Contents
Advertisement
RS-232
H
C
T
OST
HARACTER
IMEOUT
This parameter determines the maximum time the reader waits between characters
transmitted by the host before discarding the received data and declaring an error.
The timeout is set in 0.01 second increments from 0.01 seconds to 0.99 seconds.
After scanning the barcode below, scan two
Numeric Barcodes
in Appendix C to set
the desired timeout. To change the selection or cancel an incorrect entry, scan the
barcode in Appendix C.
CANCEL
HOST CHARACTER TIMEOUT
14
Advertisement
Table of Contents
