Table of Contents
Advertisement
CODE SELECTION
Length Within Range - Select this option to decode only codes within a specified
range. For example, to decode I 2 of 5 symbols containing between 4 and 12
characters, first scan I 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single
digit numbers must always be preceded by a leading zero)
Numeric Barcodes
in
Appendix C. To change the selection or cancel an incorrect entry, scan the
CANCEL
barcode in Appendix C.
I 2 of 5 - LENGTH WITHIN RANGE
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of
characters.
Note: Selecting this option may lead to misdecodes for I 2 of 5 codes.
I 2 of 5 - ANY LENGTH
I 2 of 5 Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it
complies with a specified algorithm, either USS (Uniform Symbology Specification),
or OPCC (Optical Product Code Council).
DISABLE
USS CHECK DIGIT
38
Advertisement
Table of Contents
