Installing A Hard Disk - Lexmark W840 User Manual

Installing a hard disk

Note: You need a small Phillips screwdriver to attach the hard disk to the mounting plate.
1
Remove the system board access panel. (See Accessing the printer system board.)
2
Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.
3
Align the ribbon cable connector with the connector pins on the hard disk.
4
Attach the ribbon cable to the hard disk.
5
Align the screw holes on the mounting plate with the holes in the hard disk.
6
Secure the mounting plate to the hard disk with the screws.
Installing options
Hard disk
Installing a hard disk
32
Ribbon cable