Rtsp Tab - Basler BIP2-XXXXc User Manual

Configuring the Camera
Search Domain
- Sets the domain names the camera will use for resolving non-fully qualified host
names via DNS lookups. Multiple domain names can be defined, which have to be separated by a
space.
HTTP Port
- Sets the HTTP port on which the web interface will listen.
Commit
- Click the Commit button to save any changes you have made to the network settings.
Revert
- Click the Revert button to cancel any changes you have made to the network settings. The
settings will revert to what they were the last time that the Commit button was clicked.
3.8.2

RTSP Tab

Multicast On-Demand
"on-demand" stream. When multicast streaming on-demand is enabled, the camera will only deliver
a multicast video stream when one or more devices are requesting the multicast stream. This is an
additional bandwidth reducing mechanism.
Multicast Stream
- If multicast streaming is enabled, you can set which one of your streams you
want to use for multicasting.
Multicast Metainfo
- If multicast streaming is enabled, check the Multicast Metainfo check box to
add the SEI NAL header before each frame when using H.264 multicast streaming.
Multicast IP
- If multicast streaming is enabled, sets the IP address for multicast streaming. The
Multicast IP address must be in the range from 224.0.1.0 to 239.255.255.255.
Multicast Port
- If multicast streaming is enabled, sets the port for multicast streaming.
Multicast TTL
- If multicast streaming is enabled, sets the multicast Time-To-Live (TTL). The
multicast Time-To-Live (TTL) value specifies the number of routers (hops) that multicast traffic is
permitted to pass through before expiring on the network.
54
Enabled
- Check the Enabled box to enable the Real Time
Streaming Protocol (RTSP). RTSP is a control protocol that allows
the camera to negotiate which transport protocol to use for the video
streams. Typically, RTSP streaming should be enabled.
RTSP Port
- Sets the port that will be used by RTSP. The default
port is 554.
Multicast
- Check the Multicast box to enable multicast streaming.
Multicasting is a bandwidth conserving technology. It reduces
bandwidth by allowing the camera to deliver a single video stream to
multiple recipients on the network. Note that multicasting will only
work for streams where the Encoder Type parameter (see
Section 3.4.2 on page
- Check the Multicast On-Demand box to make the multicast stream an
29) is set to MPEG4 or to H.264.
Basler IP Fixed Box Cameras
AW00097209000