Basler BIP2-XXXXc User Manual page 20

Configuring the Camera
Incandescent = The camera will automatically change the white balance settings so that they

are biased for incandescent lighting (a color temperature of 3000 K). Once the settings are
changed, the white balance will stay fixed at that point.
Fluorescent I = The camera will automatically change the white balance settings so that they

are biased for normal fluorescent lighting (a color temperature of 2700 K). Once the settings
are changed, the white balance will stay fixed at that point.
Fluorescent II = The camera will automatically change the white balance settings so that they

are biased for bright fluorescent lighting (a color temperature of 4000 K). Once the settings are
changed, the white balance will stay fixed at that point.
Manual = White balance is controlled manually. You can adjust the white balance by using the

Red Gain and Blue Gain parameters (see below).
Red Gain
- If the White Balance Mode parameter (see above) is set to manual, then the Red Gain
parameter can be used to adjust the intensity of the red in the captured images. Decrease the
setting to make the images less red, and increase the setting to make the images more red.
Note that if the White Balance Mode parameter is set to a value other than manual, the Red Gain
parameter will be read only and will indicate the current red gain value as set by the automatic white
balance control.
Blue Gain
- If the White Balance Mode parameter (see above) is set to manual, then the Blue Gain
parameter can be used to adjust the intensity of the blue in the captured images. Decrease the
setting to make the images less blue, and increase the setting to make the images more blue.
Note that if the White Balance Mode parameter is set to a value other than manual, the Blue Gain
parameter will be read only and will indicate the current blue gain value as set by the automatic
white balance control.
16
AW00097209000
Basler IP Fixed Box Cameras