Lexmark P700 User Manual page 31

Is the paper loaded correctly? Make sure you do not force the
paper into the printer. For help, refer to the Lexmark P700 Series
Photo Jetprinter User's Guide.
Did you install the printer software correctly?
From your desktop, click Start
If Lexmark Z700–P700 Series does not appear in your list of
programs, install the printer software. Refer to the setup
documentation for installation instructions.
Is your printer connected to your computer through an external
device, such as a USB hub, switch box, scanner, or fax machine?
If not, refer to the Troubleshooting section of the Lexmark P700
Series Photo Jetprinter User's Guide for help. If it is, follow these
steps:
1
Disconnect your printer from any external devices.
2
Connect your printer directly to your computer with a USB cable.
3
Follow these instructions to print a test page.
a
Open the Lexmark Z700–P700 Solution Center (see page 28).
b
From the Maintenance tab, click Print a test page.
•
If the test page prints, the problem may be with your external
devices, not your printer. Check the documentation that came
with your external devices for help.
•
If the test page does not print, refer to the printer software Help
(see page 29) for further troubleshooting information.
Programs or All Programs.
31