Switching The Equalizer On/Off; Setting The Equalizer; Setting The Level Indicator - Blaupunkt Heidelberg CD51 Operating Instructions Manual

Switching the equalizer on/off

In order to switch off the equalizer,
hold down the DEQ < button until
EQ lights up on the display and
"EQ ON" appears briefy.
To switch off the equalizer, hold
down the DEQ < button until
EQ goes out on the display and
"EQ OFF" appears briefy.

Setting the equalizer

Press the DEQ button <.
Select "DIGITAL EQ" using the
button :.
or
Select the filter using the
button :.
Press the or
To select the frequency, press the
button :.
Set the level using the
ton :.
To select the next filter, first press
the OK button ;, then the
button :.
When all the settings have been
selected, press the DEQ button <.
or
button :.
or but-
or

Setting the level indicator

The level indicator (spectrometer) on
your display briefly indicates the volume,
tone and equalizer settings with sym-
bols on your display as you make the
corresponding settings.
When settings are not being made, the
spectrometer indicates the original lev-
el of the car radio.
You can also set the type of spectrome-
ter on your menu.
There are two types available.
Selecting a spectrometer type
Press the MENU button 8.
"MENU" appears on the display.
button : repeatedly
Press the
until "EQ DISPLAY" appears on the
display.
Press the or
choose between displaying
"SPECTRUM1" and "SPECTRUM2"
or "EQ DISP OFF" set the volume
distribution left/right.
Press the MENU button 8 or OK
; once you have completed the
setting.
EQUALIZER
button : to
23