Equalizer; Notes On Adjusting The Equalizer; Switching The Equalizer On/Off; Setting The Equalizer - Blaupunkt CASABLANCA CD52 Operating Instructions Manual

EQUALIZER

Equalizer
This car radio is fitted with three para-
metric digital equalizers, which can be
set individually. This means you have
the means to save and request differ-
ent equalizer settings for different situ-
ations (eg only driver, driver and front
passenger or vehicle occupants in front
and back).
"Parametric" means that for each of the
five filters, one frequency can be indi-
vidually raised or lowered (GAIN +8 to
-8). The following filters are available:
SUB LOW EQ
LOW EQ
MID EQ
MID/HIGH EQ
HIGH EQ
These filters can be set without meas-
uring equipment. This means that the
sound quality inside the vehicle can be
greatly influenced.
Presets for different musical styles (SND
PRESETS) can also be selected.
52
32 - 50 Hz
63 - 250 Hz
315 - 1250 Hz
1600 - 6300 Hz
8000 - 12500 Hz

Notes on adjusting the equalizer

We recommend you use a CD you are
familiar with when adjusting the equal-
izer.
Before adjusting the equalizer, set the
tone and volume balance to zero. To do
this, please see the chapter "Tone and
volume balance".
Listen to the CD.
Evaluate the tone impression ac-
cording to your taste.
Now consult the chart "An aid to
adjusting the equalizer" in the
"Sound impression" section.
Set the equalizer values as de-
scribed under "What to do".

Switching the equalizer on/off

To switch on the equalizer, hold
down the DEQ button < until EQ
lights up on the display "EQ ON" is
briefly displayed.
To switch on the equalizer, hold
down the DEQ button < until EQ
disappears from the display "EQ
OFF" is briefly displayed.

Setting the equalizer

Press the DEQ button <.
Select "DIGITAL EQ" using the
button :.
or
Select the equalizer "USER EQ1",
"USER EQ2" or "USER EQ3",
which you would like to set by
pressing the
Select the filter using the
button :.
button :.
or the
or