Tuning Into A Station; Setting The Sensitivity Of The Station Search Mode; Storing Stations - Blaupunkt Heidelberg CD51 Operating Instructions Manual

In order to switch between FM
memory levels, briefly press the
FM/TS button 5.
To select the AM waveband, press
the AM button ?.

Tuning into a station

There are various methods available for
tuning into a station.
Automatic station search mode
Press the or
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
Press either the
Note:
You can only tune into stations manual-
ly if the RDS function has first been de-
activated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called "broadcasting
network".
Press the or
move to the next station on the
broadcasting network.
Note:
If you want to use this feature, the RDS
function must first be activated.
You will then only be able to switch to
stations that you have received once
button :.
buttons :.
or
button : to
already. To do so, use the Scan or Trav-
elstore function.
Setting the sensitivity of the
station search mode
You can choose whether you wish to
preset only strong or also poor-recep-
tion stations.
Press the MENU button 8.
button : repeatedly
Press the
until "SENS" appears on the dis-
play.
button :.
Press the
The display shows the currently set val-
ue for sensitivity. "SENS HI" denotes
maximum sensitivity. "SENS LO" is the
minimum. If "SENS LO" is selected, "lo"
appears on the display.
buttons : to set the
Use the
desired degree of sensitivity.
When you have completed the set-
tings, press the MENU button 8
or the OK buttons ;.

Storing stations

Storing stations manually
Select the required memory level,
FM1, FM2, FMT or the AM wave-
band.
Tune into the desired station.
Hold down one of the preset station
buttons 1 - 6 > on which you wish
to store the station for more than
two seconds.
RADIO MODE
11