Repeating A Track (Repeat); Interrupting Play (Pause); Changing The Display; Naming Cds - Blaupunkt Heidelberg CD51 Operating Instructions Manual

Stopping SCAN and continuing
playback
Press the OK button ; to end
scanning.
The current track will then continue to
play.

Repeating a track (REPEAT)

If you would like to repeat a track,
press button 4 RPT >.
"REPEAT TRCK" appears briefly on the
display, the RPT symbol lights up. The
track is then repeated until RPT is de-
activated.
Stopping REPEAT
If you would like to end repeat,
press the button 4 RPT > once
again.
"REPEAT OFF" appears briefly on the
display, the RPT symbol goes out. Nor-
mal playback is resumed.

Interrupting play (PAUSE)

Press the button 3
"PAUSE" appears on the display.
Ending Pause
Press the button 3
pause.
Play then resumes.

Changing the display

To alter the display between track
number and time or track number
and playing time or track number
and CD name, press the
7 button once or several times for

Naming CDs

To make it easier for you to recognise
your CDs, the car radio offers an indi-
vidual name option for 30 CDs. The
names should have a maximum of eight
digits. If you attempt to allocate more
than 30 names, "FULL" will appear on
the display.
Entering/altering CD names
You are now in the edit mode. If the CD
you have selected is still unnamed, eight
underlines appear on the display.
>.
> during the
Clearing a CD name
/ DIS
more than two seconds until the
desired elements appear on the
display.
Listen to the desired CD.
Press the MENU button 8.
buttons : to select
Use the
"CD NAME".
Press the or
The current input position flashes.
buttons : to select
Use the
your characters. If a position is left
blank, you have selected the un-
derline.
button : to pro-
Use the or
ceed to your next input position.
Press the MENU button 8 or OK
; to save the name entered.
Listen to the CD whose name you
wish to clear.
Press the MENU button 8.
CD MODE
button : twice.
15