Localtalk Menu - Lexmark Optra M410 User Manual

LocalTalk Menu

LocalTalk Menu
Menu Item
LocalTalk Port
PCL SmartSwitch
PS SmartSwitch
*Factory default
96
Chapter 3: Using the Operator Panel and Menus
Values
Disabled*
LTalk Option 1
Select to activate the LocalTalk port on the Tri-Port interface option card.
LTalk Option 1
If you select Disabled , all of the other menu items in the
Off
On*
If PCL SmartSwitch is set to
connection and selects PCL emulation if the data indicates that is the printer language.
If both PCL SmartSwitch
specified in the Printer Language
to , the printer uses the language that has its SmartSwitch setting set to
Off
Off
On*
If PS SmartSwitch is set to
interface connection and selects PostScript 3 emulation if the data indicates that is the printer
language.
If both PCL SmartSwitch
specified in the
Printer Language
to , the printer uses the language that has its SmartSwitch setting set to
Off
Use the LOCALTALK MENU to change settings affecting
jobs sent to the printer through the LocalTalk port.
If is set to
LocalTalk Port
the LOCALTALK MENU are not available.
This menu is only available if the Tri-Port interface option
card is installed in your printer.
On , the printer examines the data on the LocalTalk interface
and PS SmartSwitch are set to
menu as the default. If only one SmartSwitch setting is set
On , the printer examines the data on the specified LocalTalk
and PS SmartSwitch are set to
menu as the default. If only one SmartSwitch setting is set
, all other menu items in
Disabled
LOCALTALK MENU are not available.
Off , the printer uses the language
On
Off , the printer uses the language
On
as the default.
as the default.