Lexmark Optra M410 User Manual page 104

Network Menu (continued)
Menu Item
Network Buffer
Network 1 Setup
*Factory default
92
Chapter 3: Using the Operator Panel and Menus
Values
Auto*
3K to maximum size allowed
You can configure the size of the network input buffer to meet the requirements of your
system. If the limited size of the network buffer is preventing you from continuing work in your
software application each time you send a job to the printer, you may want to increase the
buffer size.
The maximum size available for modification depends on the amount of memory in your
printer, the size of the other link buffers, and whether
maximize the range for the network buffer size, you can disable or reduce the size of the
parallel and USB buffers.
Choose to let the printer calculate the buffer size proportional to the total amount of
Auto
available printer memory. In most cases,
Note: Changing the
Network Buffer
Values for this menu item are supplied by the specific network card. Open the menu to see the
available values.
For more information, refer to the documentation that comes with your network option.
Resource Save
Auto is the recommended setting.
setting automatically resets the printer.
is set to or . To
On Off