Buttons - Lexmark E340 User Reference Manual

If the light is
On
Blinking

Buttons

Use the five operator panel buttons to open a menu, scroll through a list of values, change printer settings, and respond to
printer messages.
Note: Buttons act on the information displayed on the second line of the operator panel.
The following information describes the functions of each button.
Button Function
Go Press Go to:
• Return to the Ready state if the printer is offline (the Ready message does not appear on the display).
• Exit printer menus and return to the Ready state.
• Clear some operator panel messages.
• Resume printing after loading print media and clearing paper jams.
• Exit Power Saver.
If you have changed printer settings from the operator panel menus, press Go before sending a job to
print. The printer must display Ready for jobs to print.
Menu Each end of the button has a function. Press Menu>:
• When Ready is displayed, to take the printer offline (out of the Ready state) and enter the menus.
• When Busy is displayed, to take the printer to the Job Menu.
• When the printer is offline, to scroll through the menus.
Press <Menu to go to the previous item in the menus.
For menu items with numeric values, such as Copies, press and hold Menu to scroll through the values.
Release the button when the number you want appears.
Select Press Select to:
• Open the menu shown on the second line of the operator panel. Depending on the type of menu, this
action:
– Opens the menu and displays the first item in the menu.
– Opens the menu item and displays the default setting.
• Save the displayed menu item as the new user default setting. The printer displays the
message and returns to the menu item.
• Clear certain messages from the operator panel.
Return Press Return to return to the previous menu level or menu item.
Stop Press Stop at the Ready, Busy, or Waiting message to temporarily take the printer offline. The message
changes to Not Ready. No data is lost.
Press Go to return the printer to the Ready, Busy, or Waiting state.
If your printer is configured as a network printer available to a number of users, it is possible that Menus Disabled appears
on the display when you press Menu from the Ready state. Disabling the menus prevents other users from using the
operator panel to inadvertently change a printer user default that has been set by the administrator. You can still clear
messages and select items from the Job Menu when printing a job, but you cannot change other printer settings. However,
you can use your printer driver to override printer user defaults and select settings for individual print jobs.
Understanding the operator panel
The printer is
On, but idle
On and busy
Using the operator panel
55
Saved