Standard Usb Port Disabled; Too Many Disks Installed - Lexmark C935 Series User Manual

Understanding printer messages
3
Remove the unsupported optional interface card or internal print server from the printer system board. For more
information, see the User's Guide on the Software and Documentation CD.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
56 Parallel port <x> disabled
•
Press until Continue appears, and then press
The printer discards any data received through the parallel port.
•
Make sure the Parallel Buffer menu item is not set to Disabled.
56 Serial port <x> disabled
•
Press until Continue appears, and then press
The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item is not set to Disabled.

56 Standard USB port disabled

•
Press until Continue appears, and then press
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu item is not set to Disabled.
56 USB port <x> disabled
•
Press until Continue appears, and then press
The printer discards any data received through the USB port.
•
Make sure the USB Buffer menu item is not set to Disabled.
57 Configuration change, held jobs were not restored
Press until Continue appears, and then press

58 Too many disks installed

1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the extra disks.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
to clear the message.
to clear the message.
to clear the message.
to clear the message.
to clear the message.
124