Printing A Font Sample List; Printing A Directory List; Printing The Print Quality Test Pages - Lexmark C935 Series User Manual

Printing

Printing a font sample list

To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press repeatedly until
4
Press repeatedly until
5
Press repeatedly until
press .
After the font sample list prints, Ready appears.

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press until Reports appears, and then press
4
Press until Print Directory appears, and then press
Printing Directory List appears. After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press until Prt Quality Pgs appears, and then press
The print quality test pages print.
5
Press until Exit Config Menu appears, and then press
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.
.
Reports appears, and then press
Print Fonts appears, and then press
appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then
.
while turning the printer on.
.
.
.
.
.
.
53