Table of Contents
Advertisement
3.3 Resetting to factory settings
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Choose your desired transponder at the Frequency op-
tion.
3. Change the Polarization option to match to that of your
desired transponder.
4. Set the Modulation option to match to that of your de-
sired transponder. If the transponder is of the DVB-S2
standard, you should set this option to DVB-S2 QPSK or
DVB-S2 8PSK. Then the FEC option and the Pilot option
will become enabled. You also should set these options
correctly.
5. To change a satellite entry's name, select your desired
entry at the Satellite Name option and select the SAT
Name Edit option. Then the on-screen keyboard ap-
pears. Change the name and save it. See
to use the on-screen keyboard.
6. Select the Save option and press the
the changes. To stop at any time or to exit without saving,
£
¢
press the
EXIT
The digital receiver maintains the following data:
• Satellite list
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. Select the Instal-
lation > System Recovery > Factory Setting menu, and then
you get asked for confirmation. With the choice of Yes, the
services list, favourite list and timer list will all be cleared, and
3.3 Resetting to factory settings 25
¡
button.
§6.3
as to how
£
¢ ¡
button to save
OK
Advertisement
Table of Contents
