Resetting To Factory Settings - Topfield TRC-1400 User Reference

You should set the Search Mode option to Auto for the first
time after connecting up the digital receiver, then the digital
receiver will search for all available services.
You may choose to only search for the services of a specific
transponder since more than one service are provided via each
transponder. Set the Search Mode option to Manual, then se-
lect your desired transponder at the Channel option. The num-
ber ranges from 5 to 12 (or D to H) in VHF and 21 to 69 in UHF.
You may need to set the Modulation option to match to that of
your desired transponder. If the transponder is of the DVB-T2
standard, you should set it to DVB-T2.
It is possible to search single service in a certain transponder
only if you know the desired service's audio and video packet
identification (PID). Set the Search Mode option to Advanced,
then the PID option becomes enabled. Specify the PIDs of your
desired service with the numeric buttons.
The digital receiver can check and notify if there is updated
services list. Set the Automatic channel list update option to
On if you want the unit to keep you updated on new services.
A pop-up message will appear when there are new services de-
tected. With the choice of Yes you will be moved to the service
search screen automatically. If you prefer to check for updates
manually, turn this option Off.
To start service search, move down to the Start Search item,
and press the
search for services and display a list of television and radio
services as they are found. It is common for no channels to be
found until quite late in the process. When the scan is com-
plete, you will see a message telling you how many services
have been found. Press the

3.2 Resetting to factory settings

The digital receiver maintains the following data:
£
¢ ¡
button. The digital receiver will start to
OK
• Services list
3.2 Resetting to factory settings 17
£
¢ ¡
button to save the list.
OK