Table of Contents
Advertisement
the above settings, the digital receiver will scan all speci-
fied transponders one by one until it gets the Greenwich
Mean Time.
4. Make sure that your local time is correctly displayed on
the Local Time item.
To set the local time manually, set the Mode option to Man-
ual and enter your local time to the Local Time option with
the numeric buttons. The time format is day/month/year 24-
hour:minute. To change the time format to 12-hour format, set
the Time Format option to 12 Hours.
If daylight saving time is observed in your state at the moment,
set the Daylight Saving Time option to On.
NOTE
Daylight saving time adds one hour to the time when the op-
tion is set to On. When setting the time offset from Green-
wich Mean Time, make sure that time offset does not include
daylight saving time.
4.3 Local time setting 33
Advertisement
Table of Contents
