Topfield TF-S3000CHD User Manual page 21

High definition digital satellite receiver usb pvr-ready common interface conax imbedded

Hide thumbs Also See for TF-S3000CHD:

Table of Contents

To use the SCART output

To use the Composite video output

If you connect with a standard SCART cable, you do not have

to make audio connection because it can output stereo audio

as well. But if you use a conversion cable such as SCART-to-

Component, then you have to make audio connection.

NOTE

You cannot view high deﬁnition video by means of the

SCART output.

NOTE

You cannot view high deﬁnition video by means of the Com-

posite video output.

2.4 Connecting up your digital receiver 13

For best results with a standard television set,

you should use a SCART cable. Plug one end

of the cable into the TV socket on the digital

receiver, and plug the other end into a free

SCART socket on your television.

You need to obtain a Composite video cable

(RCA cable) to use the Composite video out-

put. Plug one end of the cable into the VIDEO

(yellow) socket on the digital receiver, and

plug the other end into the matching socket

on your television.

Table of Contents