Resetting To Factory Settings - Topfield CRC-1400 User Reference

You should set the Search Mode option to Auto at the first
service search after installing the digital receiver. The digital
receiver will search all available services with the automatic
search mode within the frequency range from the frequency
of the Start Frequency option to the frequency of the End Fre-
quency option. Symbol Rate stands for data transfer rate, and
QAM is a form of modulation used in digital broadcasting.
Broadcasting operators send their services in a symbol rate by
a modulation method. Perhaps you do not have to specify the
Symbol Rate and QAM Mode options since they are seldom
changed. However, you should set the QAM Mode option to
Auto for more certainty. You can specify the Start Frequency,
End Frequency and Symbol Rate options with the numeric
buttons if you want to change them.
To search only one frequency, set the Search Mode option to
Manual and specify your desired frequency at the Frequency
option with the numeric buttons.
If you want to search services quickly, it is most recommended
that you should set the Search Mode option to Quick Scan.
With this option, you can search every service rather quickly.
To start service search, move down to the Start Search item,
and press the
search for services and display a list of television and radio
services as they are found. It is common for no channels to be
found until quite late in the process. When the scan is com-
plete, you will see a message telling you how many services
have been found. Press the

3.2 Resetting to factory settings

The digital receiver maintains the following data:
£
¢ ¡
button. The digital receiver will start to
OK
• Services list
• Favourite list
• Timer list
• Preference settings
3.2 Resetting to factory settings 17
£
¢ ¡
button to save the list.
OK