Problem Solving Guide - Miele TX2070 Operating And Installation Instructions

Problem solving guide

With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
This will save you time and money because you won't need to book a Service
technician.
The following information may help you to find the reason for a fault, and to correct
it. Please note:
,
Installation work and repairs to electrical appliances must only be carried
out by a suitably qualified and competent person in strict accordance with
current local and national safety regulations. Repairs and other work by
unqualified persons could be dangerous. The manufacturer cannot be held
liable for unauthorised work. Ensure that current is not supplied to the
appliance until after maintenance or repair work has been carried out.
Problem
The cooktop or
cooking zones
cannot be switched
on
36
Possible cause
The system lock has been
activated.
The fuse is defective or has
tripped.
There may be a technical
fault.
Remedy
You need to deactivate the
system lock (see "Safety
lock").
Reset or replace the fuse.
Disconnect the appliance
from the mains connection
for approx. 1 minute:
– switch off at the wall
socket, or switch off at
the isolator,
or
– disconnect the mains
fuse.
Reset the trip switch in the
mains fuse box, and switch
the appliance back on. If it
still will not switch on,
contact a qualified
electrician or Miele.