Installation - Miele TX2070 Operating And Installation Instructions

Installation

Attach the spring clamps and the
support brackets (only for cooktops
with bevelled edges) as applicable.
Cooktops with bevelled edges:
These cooktops have a sealing strip
underneath them to keep the cooktop
securely in position. Any gap
between the frame and worktop will
reduce with time.
^ Make the worktop cut-out for one or
more appliances as applicable.
Remember to maintain a minimum
safety distance (see "Safety
instructions for installation").
48
Wooden worktops
^ Seal the cut surfaces of wooden
worktops with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
Make sure these materials do not
get in contact with the surface of the
worktop.
^ Position the spring clamps supplied
and support brackets (only for
cooktops with bevelled edges) on the
top edge of the cut-out in the
positions marked.
^ Fasten the spring clamps a and the
support brackets b with the
provided wood screws 3.5 x 25 mm.