Switching Off And Residual Heat Indicators - Miele TX2070 Operating And Installation Instructions

Use

Switching off and residual heat indicators

To switch off a cooking zone
To switch off the cooktop
Residual heat indicator
24
^ Touch the sensor of the required cooking zone twice.
A 0 flashes in the cooking zone display for a few seconds. If
the cooking zone is still hot, the residual heat indicator will
then appear in the display.
^ Touch the "s" sensor.
This switches off all cooking zones. The residual heat
indicator will appear in the display of any cooking zone which
is still hot.
The lines of the residual heat indicator go out one after
another as the cooking zones cool down. The last horizontal
line only goes out when the cooking zone is safe to touch.
Do not touch or place any heat-sensitive objects on the
cooking zones while the residual heat indicators are on.
Danger of fire!
After a circuit break-off, all residual heat indicators will
flash.