ZyXEL Communications Omni TA128 Quick Start Manual page 22

ZyXEL
Step 6 - Make sure your Omni TA128 modem appears in the Connect Using box. If you
have settings given to you from your Internet Service Provider, follow those
guidelines and proceed to step 7. If not, click on the Server Type and continue.
T
If you are using PPP, use the default settings shown above.
T
If you are connecting to a LAN, then select Login to Network.
T
If you are logging on to a Microsoft Windows network, select NetBEUI.
T
If you are logging on to a Novell network, then select IPX/SPX
Compatible.
T
If you are logging on to an Internet connection, then select TCP/IP.
Step 7 - Click on TCP/IP Settings. Click the Specify name server address radio button
and enter your primary and secondary DNS (Domain Name Server) numbers.
Obtain the DNS numbers from your ISP. If your host requires you to specify an IP
address (Static IP), click on Specify an IP address and enter your IP address only.
Click OK. This completes the dial-up networking definition.
Configuring Windows 95 Dial-Up Networking
Omni TA128 Quick Start Guide
19
Page