Lexmark C 910 Quick Reference Manual page 9

Message
81 Transfer Belt
Exhausted
It is time to replace the
transfer belt.
84 <color> PC Life
Warning
It is time to replace one or
more specified
photodevelopers.
85 Coating Roll Life
Warning
It is time to replace the oil
coating roll.
88 <color> Toner Low
It is time to replace one or
more toner cartridges.
900-999 Service Message
Messages 900–999 relate to
printer problems that may
require service.
Action
• Press Go to clear the message.
• Install a new transfer belt.
Note: If the front door is opened and
closed, the message Did you
replace transfer belt? appears. If
a new transfer belt has not been
installed, press Stop. If a new transfer
belt has been installed, press Go.
• Press Go to clear the message.
• Install a new <color>
photodeveloper.
• Press Go to clear the message.
• Install a new oil coating roll
Note: When the life of the coating roll
has expired, 85 Coating Roll
Exhausted appears. You must replace
the coating roll to continue printing.
• Press Go to clear the message.
• Install a new <color> toner cartridge.
Note: When the life of the toner
cartridge has expired, the display
alternates between the 88 <color>
Toner Empty and Open Cover
Replace <color> messages. You
must replace the toner cartridge to
continue printing.
Turn the printer off and check all cable
connections. Turn the printer back on.
If the service message recurs, call for
service and report the message
number and description of the problem.
7