Connecting To A Telephone - Lexmark 5600 Series User Manual

3
Remove the protective plug from the EXT port
4
Connect a second telephone cord from the computer modem to the EXT port

Connecting to a telephone

Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever
your telephone is located to make copies or to send and receive faxes without using a computer.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer
to telecommunications equipment, see the related topic, "Using an RJ11 adapter."
1
Make sure you have the following:
•
A telephone
•
Two telephone cords
•
A telephone wall jack
2
Connect one telephone cord to the LINE port
of the printer.
of the printer, and then plug it into an active telephone wall jack.
Setting up the printer
43
of the printer.