Lexmark 5600 Series User Manual page 94

Lexmark 5600-6600 series printer user's guide
Hide thumbs Also See for 5600 Series:
Table of Contents

Advertisement

If you choose to send the scanned image to a memory card or flash drive:
a
Insert the memory device.
Note: Make sure that the memory device is not write-protected.
b
Press the arrow buttons until Memory Card or USB Flash Drive appears, and then press
c
Use the arrow buttons to select the quality and original image size, and then press
a selection.
d
Press
.
Note: Do not remove the memory device until the menu indicates that the file has been saved.
If you choose to send the scanned image to a computer over the network (selected models only):
a
Press the arrow buttons until Network appears, and then press
b
If prompted, press the arrow buttons until the computer name of the network computer appears, and
then press
Notes:
You may be prompted to enter a PIN if the computer requires it. To assign a computer name and a
PIN to the network computer, see the Help for the printer software associated with your operating
system.
If your printer has a numeric keypad, enter the PIN using the keypad, and then press
If your printer does not have a numeric keypad, use the arrow buttons to decrease or increase the
value for each digit (the default value is 0000) in the PIN, and then press
digit.
c
Wait until the printer has finished downloading the scan applications list.
d
Press the arrow buttons until the application that you want appears, and then press
e
Use the arrow buttons to select the quality and original image size, and then press
a selection.
f
Press
.
Note: Do not remove the memory device until the menu indicates that the file has been saved.
Using Windows
1
Open the top cover, and then load an original document facedown on the scanner glass.
2
Close the top cover to avoid dark edges on the scanned image.
3
Do one of the following:
In Windows Vista, click
In Windows XP and earlier, click Start.
4
Click All Programs or Programs, and then select the printer program folder from the list.
5
Click Lexmark Productivity Studio.
6
From the main screen, click Scan.
7
Follow the instructions on the computer screen.
.
.
Scanning
94
each time you make
.
each time you select a
.
each time you make
.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents