UTStarcom PLS-7025 Phone Manual page 116

2.
Under "Recipients", input the phone number and
press
include additional recipients, select Enter Addr 2, Enter
Addr 3, etc., after each entry. You may include up to 10
recipients per message.). Press Options (
from the following:
3.
Select Enter Msg. and compose a message; or use the
preset messages or emoticons; and press Next (
4.
Review your message and press Send (
also select additional messaging options by pressing
Options [
108 Section 3A: Wireless Service Feature s – The Basics
Next (
Find to find and select a recipient from your internal
Contacts list.
Recent Calls to select a recipient from your recent calls
list.
To type a message, use your keypad to enter your
message. Use the right softkey to select a character
input mode. (See "Entering Text" on page 29.)
To use a preset message or a smiley, press the right
softkey, select Emoticon or Preset Msg. , highlight
your desired message or emoticon, and then press
.
] to save the text message to draft folder.)
) to save the recipient. (To
) to choose
)
). (You may