Upnp - D-Link DIR-620 User Manual

D-link dir-620 multifunction wireless router supporting wimax, 3g gsm/cdma with built-in switch

Hide thumbs Also See for DIR-620:

Table of Contents

DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA

with Built-in Switch

User Manual

UPnP

On the Advanced / UPnP page, you can enable the UPnP function.

UPnP is a set of networking protocols designed for automatic configuration of network devices. The

UPnP function performs automatic configuration of the device's parameters for network

applications requiring an incoming connection to the router.

If you want to manually specify all parameters needed for network applications, deselect the

Enabled checkbox and click the Change button.

If you want to enable the UPnP function in the router, select the Enabled checkbox, select an

interface for which the router's parameters will be automatically configured from the Interface

drop-down list, and click the Change button.

Figure 47. The Advanced / UPnP page.

Page 72 of 107

Configuring via Web-based Interface

Table of Contents