Net; Connections - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual

Net

In this menu you can configure basic parameters of the router's local area network, configure
connection to the Internet (a WAN connection), and specify all needed settings for your wireless
network.

Connections

On the Net / Connections page, you can create and edit connections used by the router.
By default, two connections are configured in the system:
LAN: corresponds to the local interface of the router (br0). The connection is represented
•
by the ports of the built-in switch (ports 1-4) and the wireless interface of the router. You
cannot delete this connection.
WAN: connection to the Internet. This connection is assigned to the INTERNET port of the
•
router (port 5). You can edit this connection or delete it.
To create a new connection, click the Add button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the Save button.
To delete an existing connection, left-click the relevant line in the table. On the page displayed,
click the Delete button.
To use one of existing WAN connections as a default gateway, select the choice of the Default
gateway radio button located in the line corresponding to this connection.
Figure 17. The Net / Connections page.
Page 25 of 107
Configuring via Web-based Interface