Table of Contents
Advertisement
X5821 User's Manual
PPP Account: Your account from ISP to access Internet.
Password: Input the password assigned by your ISP.
PPPoE server name: Server name of network ISP. No need to
set.
Authentication Mode: Authentication mode of network ISP.
Default is AUTO.
Connection on demand: When this mode is selected, the
connection that has no traffic within assigned
disconnect timeout (e.g. 1 minute) will be automatically
disconnected. The connection will be activated again when
traffic arrives. This function is advantageous for users who are
charged with online time. It should be noticed that some
programs automatically link to Internet. Computer will send data
to network when infected by virus. Connection will not be
disconnected under these data streams.
Disconnect timeout: When "Connection on demand" is selected,
this input box indicates that after how
long the connection will be disconnected in the absence of
traffic. If the value is 0, connection will not be disconnected.
Press "Next step" when configuration is finished. The following
operation is same with Figure 3.5. Notice that PPPoE mode does not
work until the modem is reset.
26
Version 1.0
Advertisement
Table of Contents
