X5821 User's Manual
IX. Software Upgrade
You may easily upgrade X5821 embedded software by obtaining the
compressed upgrade kit from the service provider and then following
the steps for upgrading through a Web-browser:
Step 1:
Extract the ZIP file for updated firmware.
Step 2:
Connect X5821 via the local Ethernet port or remote ADSL
link, making sure that the X5821 Ethernet IP address and
your terminal are properly configured so that you can
successfully "ping" X5821. The default local IP address is
"192.168.1.1".
Step 3:
Launch the Web browser (IE or Netscape), and enter the
default IP address 192.168.1.1 into the address bar to
access the Web management page.
Step 4:
Click on the Management link on the navigation bar and
then on the Update Software link below it.
Step 5:
Click on the Browse to select the appropriate firmware and
then click on the Update Software button. The upgrade
process may take about 60 seconds. Do not reset the
device while
10
Version 1.0