Management - XAVI Technologies Corp. X5821 User Manual

X5821 User's Manual
VII. Management
There are several ways that you can make the configuration:
Local Ethernet Port (telnet) – connect the Ethernet port to
your local area network or directly to a PC, "telnet" X5821
from any workstation in the LAN. The default local Ethernet
IP address is "192.168.1.1". See Chapter 2, Command Line
Interface, for more details.
Local Ethernet Port (Web browser) – connect the Ethernet
port to your local area network or directly to a PC. Launch
your Web browser and enter default local Ethernet IP
address "192.168.1.1" into the address bar.
ADSL Port from Remote Site – while the ADSL connection
is in service and it is set to router mode, you may remotely
"telnet" X5821 from a workstation connected to the
equipment.
Note: As operating an ADSL device requires technical know-how and
experience, it is recommended that only qualified technical staff manage
X5821 Therefore, a password authentication is required when you enter
the command line and Web interface. See the Default Values section to
obtain the password.
8
Version 1.0