Setup Troubleshooting; Power Light Does Not Come On - Lexmark X1100 Series User Manual

Problem:
Power light does not come on
Alignment page does not print
When I insert the All-In-One software CD, nothing
happens
All-In-One is not communicating with the computer
Installation appears incomplete
All-In-One prints slowly
Print is too dark or smudged
Vertical lines are jagged or edges are not smooth
White lines appear in graphics or solid black areas
All-In-One has a paper jam
Scanning was not successful
Scanning or using a scanned image with a software
program takes a long time or freezes the computer
Edge of the copy does not print
Copy button on the control panel does not work
Fax function does not work

Setup troubleshooting

Use this section to solve problems you may have during setup.

Power light does not come on

1
Check the power supply connections.
2
Press Power on the control panel.
20
Go to page:
20
21
21
21
21
22
22
23
23
23
24
24
24
25
25