Scanning, Copying, And Faxing Troubleshooting; Scanning Was Not Successful; Scanning Or Using A Scanned Image With A Software; Program Takes A Long Time Or Freezes The Computer - Lexmark X1100 Series User Manual

Scanning, copying, and faxing troubleshooting

Scanning was not successful

The software may not be installed properly. Follow the instructions for
"All-In-One is not communicating with the computer" on page 21.

Scanning or using a scanned image with a software

program takes a long time or freezes the computer

Lower the scanning resolution. Scanning resolution is much different than
printing resolution and is generally set much lower. To change the scanning
resolution:
1
Open the Lexmark All-In-One Center. For help, see page 3.
2
From the Scan section, click See More Scan Settings.
3
Click Display Advanced Scan Settings.
4
From the Scan tab of Advanced Scan Settings, enter a lower scan
resolution.

Edge of the copy does not print

•
Make sure the original is properly oriented on the glass. For help,
see page 13.
•
Make sure the area you want to copy is not larger than the printable
area of the page. Apply the Fit-to-page feature. To apply the
Fit-to-page feature:
1
Open the Lexmark All-In-One Center. For help, see page 3.
2
From the Copy section, click See More Copy Settings.
3
From the Reduce/Enlarge section, click the second button, and
then select Fit to page from the corresponding drop-down
menu.
4
Copy your document again.
24