Parallel Menu; Setup Menu - Lexmark E234 User Reference Manual

Parallel menu

Use the Parallel menu to change printer settings on jobs sent through a parallel port.
Setting Use this setting to:
NPA Mode Send print jobs to the printer and
query printer status information
simultaneously.
Protocol Receive information at a much
higher transmission rate if your
printer is set to Fastbytes (if your
computer supports Fastbytes) or
receive information at a normal
transmission rate if your printer is
set to Standard.
Parallel Mode 2 Determine whether the parallel
port data is sampled on the
leading (On) or trailing (Off) edge
of strobe.
MAC Binary PS Configure the printer to process
Macintosh binary PostScript print
jobs.
* Factory default

Setup menu

Use the Setup menu to configure how the printer formats the end of a line depending on the
computer system being used.
Setting Use this setting to:
Auto CR after LF Specify whether the printer automatically performs a carriage return
after a line feed control command.
Auto LF after CR Specify whether the printer automatically performs a line feed after
a carriage return control command.
* Factory default
Understanding the printer configuration menus
Values
• Off
• On
• Auto*
• Standard
• Fastbytes*
• Off
• On*
• Off—The printer filters PostScript print jobs
using standard protocol.
• On—The printer processes raw binary
PostScript print jobs from computers using the
Macintosh operating system. This setting often
causes Windows print jobs to fail.
• Auto*—The printer processes print jobs from
computers using either Windows or Macintosh
operating systems.
80
Values
• Off*
• On
• Off*
• On