The Paper Is Too Small - Canon iPF780 Series Basic Manual

iPF780 Series
Cause
When Detect Mismatch in the Control Pan-
el menu is set to Pause, the type of paper
loaded does not match the type specified in
the printer driver.
When Detect Mismatch in the Control Pan-
el menu is set to Warning, the type of pa-
per loaded does not match the type speci-
fied in the printer driver.

The paper is too small.

The paper is too small.
Cause
When Detect Mismatch in the Control
Panel menu is set to Pause, paper small-
er than the size specified in the printer
driver is loaded.
When Detect Mismatch in the Control
Panel menu is set to Warning, paper
smaller than the size specified in the print-
er driver is loaded.
The paper is too small.
The paper is too small.
"Replace paper with A4/LTR (vertical) or larger"
Cause
The loaded paper is too small.
"Replace roll with 10 in. wide or larger roll."
Cause
The loaded paper is too small.
Basic Guide
2. Replace the loaded paper with paper of the type and size you have specified in
the printer driver.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
You can continue to print, but note that this error may cause paper jams or problems
in the printing results.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the printer
as follows.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Change the paper size setting in the printer driver to the size loaded in the printer
and try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the
printer driver as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button to stop print-
ing.
2.
Replace the loaded paper to match the settings in the printer driver and try printing
again.
(See "Loading and Printing on Rolls.")
(See "Loading and Printing on Sheets.")
You can continue to print, but note that this error may cause problems in the printing
results.
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.")
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Corrective Action
Replace the roll with a roll 10 inches in width or larger as follows.
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
P.23
➔
User's Guide
➔
The paper is too small.
113