Setting the distinctive ring using the control panel
Distinctive ring is a service provided by some telephone companies that assigns multiple phone numbers to a single
telephone line. If you subscribe to this service, you can program your printer to have a distinctive ring pattern and
phone number for incoming faxes.
1
From the control panel, press Fax Mode.
2
Press
.
3
Press
or
repeatedly until Fax Setup appears.
4
Press
.
5
Press
or
repeatedly until Ringing and Answering appears.
6
Press
.
7
Press
or
repeatedly until Ring Pattern appears.
8
Press
.
9
Press
or
repeatedly until the ring pattern you want appears.
10
Press
to save the setting.
Related topics:
•
"Using the control panel" on page 95
Setting up Quick Dial buttons using the control panel
1
From the control panel, press Fax Mode.
2
Enter a fax number.
Notes:
•
You can include a calling card number as part of the fax number.
•
A fax number can include up to 64 characters. Characters can include numbers, the symbols * and #, or a
three-second pause created by pressing Redial / Pause. The pause appears as a comma on the display.
3
Hold down an empty Quick Dial button for two seconds.
4
To program additional Quick Dial buttons, repeat step 2 through step 3.
Note: You can also program any empty Quick Dial button whenever you are prompted to enter a fax number.
Setting the number of rings before receiving a fax automatically using the
control panel
1
From the control panel, press Fax Mode.
2
Press
.
3
Press
or
repeatedly until Fax Setup appears.
4
Press
.
5
Press
or
repeatedly until Ringing and Answering appears.
6
Press
.
Faxing using the control panel
26